NEWSLETTER 06/2026
31.07 2026
NEWS
New in the product range: BS&B FlameSaf® 945-PA-E – Breather Vent with Integrated Flame Arrester
BS&B Safety Systems is expanding its range of safety devices for the protection of storage tanks and process equipment with the new BS&B FlameSaf® 945-PA-E. This advanced breather / tank vent combines overpressure protection, vacuum protection, and prevention of atmospheric deflagration propagation into the protected equipment in one compact solution.
The 945-PA-E is designed for applications involving flammable vapors and gases where a high level of operational safety is required. The integrated flame arrester on the vacuum side prevents flame transmission from the atmosphere into the tank or process equipment, thereby enhancing protection against ignition of the stored medium.
The PA (Pipe-Away) design allows discharged vapors and gases to be routed into a connected piping system instead of being released directly to the atmosphere. This arrangement is particularly suitable for applications where emissions must be safely directed to downstream process equipment, a combustion unit, or a vapor recovery / off-gas treatment system.

REALIZED PROJECTS
VALNAC TYPE 55 WEIGHT-LOADED SAFETY VALVES
As part of the current delivery, VALNAC safety valves (formerly Válvulas Nacional) were shipped, designed for the protection of process equipment and low-pressure storage tanks against unwanted pressure increase.
The supplied design was developed for an application requiring an extremely low opening pressure, where a standard spring-loaded design is not always the optimal solution in terms of setting accuracy and long-term stability. For this reason, the valves were equipped with a weight-loaded system instead of a conventional compression spring.
The principle of the weight-loaded system is based on the direct action of gravitational force on the valve closing element, achieving very accurate and stable adjustment of the opening pressure even at very low pressure values.
Compared with spring-loaded designs, the weight-loaded system provides the following advantages:
high accuracy of the set opening pressure, stable operation without the influence of spring material fatigue,
minimal change of the setting throughout the valve service life,
reliable opening even at very small pressure differentials.
This type of design is mainly used for low-pressure tanks, storage vessels, degassing systems, and process equipment, where it is necessary to protect the equipment against damage caused by even a minimal exceedance of the operating pressure.

BS&B FLAMESAF® FLAME ARRESTERS AND BREATHER VENTS
In June, BS&B FlameSaf® safety devices were shipped, designed for the protection of storage tanks and process equipment in environments where flammable vapors and gases may be present. The delivery included inline flame arresters, end-of-line deflagration flame arresters, and pressure-vacuum relief vents for safe tank venting.
BS&B FlameSaf® 933-S – Inline Detonation Flame Arrester
BS&B FlameSaf® 933-S – Inline Detonation Flame Arrester The Model 933-S represents an inline flame arrester installed directly into the piping system between the protected equipment and a potential ignition source. It is designed to prevent the propagation of deflagration or detonation through the pipeline and protects process equipment against flame transmission from one part of the system to another.
The design uses a flame-quenching element that cools the combustion gases below their ignition temperature, thereby stopping further flame propagation. The version designed for explosion group IIB3 enables use in demanding chemical and petrochemical applications involving flammable vapors and gases.
BS&B FlameSaf® 934-B-E – End-of-Line Deflagration Flame Arrester
The Model 934-B-E is an end-of-line deflagration flame arrester designed for installation at the end of a vent line or at the atmospheric outlet of a tank. Its main purpose is to prevent the penetration of an atmospheric deflagration back into the protected equipment. The flame arrester is designed for safe operation in environments containing flammable vapors and gases of explosion group IIB3 and complies with the requirements of EN ISO 16852 for deflagration flame arresters. The supplied DN150 version is suitable for applications with higher flow rates of vent gases and emission vapors.
BS&B FlameSaf® 937-E – Pressure-Vacuum Breather Vent with Integrated Flame Arrester
The Model 937-E combines the function of a pressure and vacuum breather vent with an integrated deflagration flame arrester in one compact device. It provides protection for storage tanks not only against overpressure and vacuum, but also against the penetration of an atmospheric deflagration into the tank interior. The integrated flame arrester is located on the vacuum side of the vent and prevents flame propagation from the atmosphere into the protected equipment. This solution enables safe tank venting during filling, emptying, or temperature changes of the stored medium, without the need to install a separate external flame arrester.





