Product categories
-
ST195 ASEPTIC DIAPHRAGM VALVE MANUAL
PN: 10 bar
Type: welded – acc. to ISO 2037
Material: molded stainless steel - CF3M
Seal: EPDM
Control: stainless steel hand wheel
Note: the inner surface polished to a Ra of 0,5 um
the outer surface blasted to Ra of 6,3 um
valves for the chemical, food and pharmaceutical industries
Suppliers: ALFALAVAL -
ST195 ASEPTIC DIAPHRAGM VALVE MANUAL - FORGED STAINLESS STEEL
PN: 10 bar
Type: welded – acc. to ISO 2037
Material: forged stainless steel – DIN 1.4435
Seal: EPDM
Control: stainless steel hand wheel
Note: the inner surface polished to a Ra of 0,5 um
the outer surface blasted to Ra of 1,6 um
valves for the chemical, food and pharmaceutical industries
Suppliers: ALFALAVAL -
YS800 STRAINER
PN: 40 bar
Type: threaded – acc. to DIN 2999 (ISO 7/1)
Material: stainless steel - DIN 1.4408
Seal: PTFE
Note: removable mesh with a mesh size of 0,5 mm
Suppliers: VALVE CONTROL -
220 STRAINER
PN: 16/10 bar, see table
Type: flanged – flanges acc. to EN 1092-1 type B
Material: cast iron - GG25
Seal: PTFE
Note: removable stainless steel mesh screen with mesh size from 1,0 up to 1,6 mm
Suppliers: VALVE CONTROL -
235 STRAINER
PN: 40 bar
Type: flanged – flanges acc. to EN 1092-1 type B
Material: steel - DIN 1.0619
Seal: carbon
Note: removable stainless steel mesh screen with mesh size from 1,0 up to 1,6 mm
Suppliers: VALVE CONTROL -
240 STRAINER
PN: 16 bar
Type: flanged – flanges acc. to EN 1092-1 type B
Material: stainless steel - DIN 1.4408
Seal: PTFE
Note: removable stainless steel mesh screen with mesh size from 0,8 up to 3,0 mm
Suppliers: VALVE CONTROL -
RV600 CHECK VALVE
PN: 40 bar
Type: threaded – acc. to DIN 2999 (ISO 7/1)
Material: stainless steel - DIN 1.4408
Seal: PTFE
Note: minimal opening pressure 0,8 bar
Suppliers: VALVE CONTROL -
RVD600 CHECK VALVE
PN: 40 bar
Type: wafer
Material: stainless steel - DIN 1.4408
Seal: METAL/METAL
Note: minimal opening pressure 0,03 bar
Suppliers: VALVE CONTROL -
364 CHECK VALVE
PN: 16/10 bar, see table
Type: wafer
Material: chrome plated carbon steel
Seal: EPDM
Note: maximal media flow rate 3m/s
Suppliers: VALVE CONTROL -
365 CHECK VALVE
PN: 16 bar
Type: wafer
Material: stainless steel - DIN 1.4408
Seal: VITON
Note: maximal media flow rate 3m/s
Suppliers: VALVE CONTROL -
SBC CHECK VALVE
PN: 10 bar
Type: flanged
Material: steel body - DIN 1.0619, linned with PFA
Note: application for aggressive media
Suppliers: SWISSFLUID -
SK70 FLOAT STEAM TRAP - THREADED
PN: 25 bar
Type: threaded – acc. to DIN 2999 (ISO 7/1)
Material: steel - DIN 1.0619
Note: with a thermostatic vent valve
vertical pipe design on request
Suppliers: VALVE CONTROL -
SK70 FLOAT STEAM TRAP - FLANGED
PN: 25 bar
Type: flanged – flanges acc. to EN 1092-1 type B
Material: steel - DIN 1.0619
Note: with a thermostatic vent valve
vertical pipe design on request
Suppliers: VALVE CONTROL -
TKK2Y THERMOSTATIC STEAM TRAP - THREADED
PN: 40 bar
Type: threaded – acc. to DIN 2999 (ISO 7/1)
Material: forged steel – A105
Note: with built-in fitter
suitable for both horizontal and vertical piping
Suppliers: VALVE CONTROL
Valve solutions
The industrial valves category includes manually operated industrial valves such as ball valves, closing and modulating butterfly valves, knife gate valves and axial valves in numerous material and connection design. The following part of this category consists of lined ball and butterfly valves used for the most severe operating conditions. The last part of this category includes strainers and check valves to ensure purity and the prescribed flow direction of the media.